2000W Pure Sine Wave 12V to 240V Inverter
(with AC Transfer Switch)
Run your favourite appliances you’d usually use at home from your 12V system with our 2000W inverter. Allowing you to power multiple appliances up to 2000W, including chargers, kettles, air fryers, hair dryers, and your Starlink system, our inverters will change the way you go off-grid.
Hardkorr inverters produce consistent, smooth and clean power just like you’d get from a mains connection. The pure sine waveform has very low harmonic distortion, resulting in a high power factor. This means much lower radio interference, reduced audible and electrical noise, and more efficient operation for inductive loads. It also allows a wider range of devices to be powered from the inverter, some of which may be susceptible to damage if using a modified sine wave inverter. Our inverters are also built to surge up to 2000W which makes it ideal for any appliance that requires a higher start up wattage.
Producing a pure sine wave output, the inverters will generate consistent, smooth, and clean power, just like you’d get from a mains connection. This means that the inverter will comfortably power sensitive appliances without the risk of damaging them. Appliances that require a higher wattage to start up can also be run – the 2000W inverter will produce up to 4000W for 2 seconds. Engineered with a larger heat sink and advanced internal circuitry, the inverter runs noticeably quieter than other inverters, even when running larger loads.
The inbuilt Residual Current Device (RCD) switch is arguably the inverter’s most important safety feature. Operating very similarly to your house system, the RCD Switch is made to detect anomalies running through your inverter and then immediately shut off the supply to reduce the risk of injury, damage, and electrocution. Additionally, the inverter has inbuilt over/under-voltage, short-circuit/overload, and over-temperature protections.
Giving the inverter the ability to run more conservatively, our 2000W model has an eco-mode function. When turned on, this function will drop the inverter’s output so that when there is no detected output, the unit will run with a draw of less than 0.2A rather than 1.3A.
On top of the inverter, the screen displays useful information about the inverter’s draw and condition. In real-time, it will show the input voltage, output voltage, outgoing current, and the inverter load capacity.
The inverter comes complete with a heavy-duty mounting flange to secure the unit, and a remote control with 5m lead.
Choose the right inverter for you
Continuous power | 2000W |
---|---|
AC surge power | 4000W |
AC output | Pure sine waveform, 240V, 50Hz, 8.3A |
Input DC range | 10.5-15.5V |
Efficiency | Full load >89%, Half load >92% |
Standby current draw | <1.1A |
Eco-mode current draw | N/A |
Outlets | 1 x IEC Type I |
Operating temperature | -20°C / 45°C |
Storage temperature | -30°C / 70°C |
Protections | Over/under voltage, short circuit/overload. over-temperature protections |
Over voltage protections | 15.5±0.2V DC |
Under voltage protections | 10.5±0.2V DC |
Dimensions | 452.7mm x 253mm x 93.7mm |
Certifications | AS/NZS 4763:2011, IEC/EN 62368-1 |
1x | 2000W pure sine wave inverter |
---|---|
1x | Inverter remote |
1x | 5m cable adapter for remote |
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.